Wholesale Air Hydraulic Pipe Bending Machines For Pipes From 1/2 Inch to 2 Inch (HHW-12Q/16Q) Manufacture
- Model
- HHW-12Q/16Q
Item specifics
- Capacity of bending
- for pipes from 1/2 inch to 2 inch
- Drive by
- air compressor
Review
Description
Wholesale Air Hydraulic Pipe Bending Machines For Pipes From 1/2 Inch to 2 Inch (HHW-12Q/16Q) Manufacture
Featuring
1. The air hydraulic pipe bending machines can be both driven by air compressor and by hand.
2. The bender is for precision cold bending of thick-walled pipes (gas, water and steam pipes, non-heated black iron pipes, galvanized pipes, schedule 40 & 80) up to 90 degree following GB/T 3091, DIN 2440, EN 10255, BS 1387 standards.
3. Capable of bending angles from 0 degree to 90 degree on pipes ranging from 1/2"-3".
4. Cold bending, no pre-warming of pipe is required.
5. Works quicker with air compressor.
6. Rugged construction for use in tough work sites.
7. Fast and easy setup, simple to use.
8. Supplied in a wooden case with a set of bending shoes and service pack.
Specifications
HHW-12Q Air Hydraulic Pipe Bending Machine
- Working Capacity: for pipes from 1/2"-2" in diameter
- Hydraulic Ram Output: 12 Ton
- Ram Stroke: 210 mm
- Air Pressure: 8 kg /120 psi
- Bending Shoes: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
- G.W.: 45 kg
- Packing Size: 63*25*50 cm
HHW-16Q Air Hydraulic Pipe Bending Machine
- Working Capacity: for pipes from 1/2"-3" in diameter
- Hydraulic Ram Output: 16 Ton
- Ram Stroke: 240 mm
- Air Pressure: 8 kg /120 psi
- Bending Shoes: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3"
- G.W.: 70 kg
- Packing Size: 70*63*21 cm
